Insert & Housing sold separately.

Crimp Pin 1mm Req.Contact AWG 26 - AWG 17

This Contact is Required for specific Insert Configurations.
Details for configurations can be found under Technical Data.

Sealcon # S7.010.901.001
Hummel # 7.010.901.001
Hummel CC-Contacts


Contacts are specific to the Inserts and number of Poles on your Connector.

  • There are two types of Contacts: Pins and Sockets. Pins are installed as Male connections and Sockets are installed as Female connections.
  • Each Pin or Socket contact has a different installation based on the number of Contacts needed and size of the Contact.

  • For example, if your Connector has a 3-Pole Insert labeled (3 x 1mm), you need three 1mm Contacts for your Insert. Likewise, if your Connector has a 3-Pole insert labeled (3 x 2mm), you need three 2mm contacts.
  • Contacts are not universal, so check to see if there is a Required Contact for your installation.
  • If you have any questions please submit a quote and one of our experts will contact you to verify you have the correct configuration for your desired Connector.

Technical Data

Mechanical Data

  • Number of Contacts: Inset 3-pole (3 x 1)
This Contact Is Required for M16 Signal Connector:
Pin (Male) Insert 3-Pole (3 x 1mm)

This Contact is Universal for any M23 Signal 1mm Insert.

Type of Contact: Crimp Pin 1 mm Machined

Crimp Range: 0.14 mm² - 1.0 mm² AWG 26 - AWG 17

Click Here for Crimp Tool Settings


PDF Files


Insert Number of Poles Required Contacts Electrical Data Add to Quote
S7.003.903.101 Insert 3-pole (3 x 1 mm) 3 x 1 mm •Number of Positions: 3 (3 x 1 mm)
•Number of Contacts: 3
•Contact Ø (mm): 1
•AWG [mm2]: 0.14 - 1
•Nominal Current1) [A]: 8
•Nominal Voltage2) [V~]: 400
•Test Voltage (Breakdown Voltage) 3) [V~]: 2500
•Insulation Resistance [MΩ]: >1010
•Max. Contact Resistance [mΩ]: 3
Select for Quote


Contacts Type of Contact Crimp Range Product Number Add to Quote
S7.010.901.001 Crimp Pin 1 mm Machined 0.14 mm² - 1.0 mm² AWG 26 - AWG 17 S7.010.901.001