Mechanical Data

Housing:Copper-Zinc Alloy, Die Casting & Aluminum
Housing Surface:Nickel Plated Brass, Other Surfaces Upon Request
Inserts (For Contacts):Thermoplastic Polyamid PA 6 (Nylon 6/6), PBT

Fire protection class V-0
Contacts:Brass Alloy
Contact Surface at point of Contact:Nickel and gold plated (0,25µm Au)
Minimum Mating Cycles:> 1000
Seals / O-Rings: Buna-N standard, optional Viton® (Viton® is a registered trademark of DuPont)
Temperature Range:-40°F to 257°F (-40°C to 125°C)
Type of Contacts:Crimp
Protection:IP 67 / IP 69 K per EN 60529 (connected), Type NEMA 4x
Cable Diameter Range: .28 – .67″ (7 – 17 mm)

Electrical Data

Number of Positions5 + PE4 + 3 + PE
Number of Contacts644
Contact Ø (mm)212
Nominal Current [A]28828
Nominal Current [V~]800300800
Test Voltage (Breakdown Voltage) [V~]600300600
Test Voltage (Breakdown Voltage) [V~]400025004000
Insulation Resistance [MΩ]> 1013> 1013
Max. Contact Resistance [mΩ]33

*Degree of Protection
Potential dirt accumulation of a disconnected connector in a certain environment.

*Degree of Protection 2
No permanent conductive dirt accumulation will occur. Temporary conductive dirt accumulation, such as condensation, is possible. Typical for households, offices, laboratories and test labs.

*Degree of Protection 3
Conductive, as well as dry non-conductive dirt accumulation can occur. It can be temporarily conductive due to condensation. Typical for industrial and factory environments.

Assembly Instructions PDF Download